TM 5-3805-261-34
WIRING AND HARNESS MAINTENANCE.
4-17.
Main Harness. (Sheet 4 of 4)
INSTALLATION
1.
Position main harness assembly in
vehicle (Figure 4-87).
2.
Position new cable straps, clamps
and
clips
on
main
harness
assembly.
3.
Connect main harness assembly to
ether start valve, switches, gages,
monitoring system panel, fuse box,
starting motor and alternator.
4.
Install
new
cable
straps
and
mounting clamps and clips.
5.
Install hood and four large plates
on steering console support. Refer
to TM 5-3805-261-20.
Figure 4-87.
End of Task
4-89
