TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
17-3.
Blade Tip Cylinder. (Sheet 5 of 6)
ASSEMBLY
11.
Install piston (4) on items 8
thru 6 as an assembly on items 18
thru 9 as an assembly (Figure
17-9).
12.
Install washer (5) and bolt (4).
13.
Using thread lubricant, lubricate
threads of bolt (4) and tighten
to 800 ft-lb torque.
14.
Position cylinder (1, Figure
17-8) in vise or repair stand
with oil holes facing downward.
15.
Using bearing driver, install one
of two rings (2, Figure 17-16)
to a depth of 0.15 inch from
outer surface of cylinder (1).
16.
Using bearing driver, install new
bearing (3) in center of
cylinder (1) cap.
17.
Using bearing driver, install one
of two rings (2) immediately
next to bearing (3). There
should be a depth of 0.15 inch
from outer surface of cylinder
(1) to one of two rings (2).
Go to Sheet 6
17-11
Figure 17-16.
Figure 17-
Figure 17-
