TM 5-3805-261-34
FRAME MAINTENANCE.
16-3.
Articulation Hitch Bearing. (Sheet 5 of 7)
INSTALLATION
WARNING
Use gloves or tongs to handle
extremely cold parts.
Contact with skin may cause
INJURY.
4.
If bearing (12) was removed,
freeze new bearing (12) to
temperature of -70 degrees F with
dry ice.
5.
Using pulling adapter, stud, pump
group, washer, nut, two bolts and
two adapters, install new bearing
(12), if removed, in upper pin
bore of front frame.
6.
Using stud, pump group, puller
assembly, washer, nut, two bolts
and two adapters, install collar
(11, Figure 16-27) in upper pin
bore of front frame.
7.
Using clean grease, lubricate new
seal (10, Figure 16-29) and
position with lip facing down on
cap (9).
8.
Using suitable drive plates and
hammer, install new seal (10) on
cap (9).
9.
Install bearing (8) in items 10
and 9 as an assembly (Figure
16-25) and position on a suitable
floor jack positioned under lower
pin bore of front frame.
Go to Sheet 6
16-19
Figure 16-
Figure 16-29.
Figure 16-