TM 5-3805-261-23-2
HYDRAULIC PUMP ASSEMBLY REPAIR - CONTINUED
0330 00
DISASSEMBLY - CONTINUED
62.
Remove nine bearings (141) from barrel (125).
141
125
397-1511
CLEANING AND INSPECTION
1.
Inspect plate (67). Use touch lapping procedure if pol-
SEAL BANDS
ished in the seal band area, minor erosion, or
scratches. Use emery cloth and cleaning compound for
touch lapping. Replace if cracked, broken, erosion
across seal bands, deep scratches in seal bands or
ports, or scratches that can be felt in the seal band area
or thrust faces with fingernail or pencil.
2.
Clean and inspect all other parts in accordance with
WP 0020 00.
67
397-1512
THRUST FACES
ASSEMBLY
1.
Apply thin coat of clean oil on all parts.
120
2.
Install dowel (134) on housing (120).
3.
Lower temperature of two bearing cups (136) and
126
press bearing cups into housing (120).
4.
Install two stops (135).
5.
Install spacer plate (126) into housing (120) with hole
in plate in alignment with dowel (134).
134
136
135
397-1513
0330 00-14