TM 5-3805-261-23-2
HYDRAULIC PUMP ASSEMBLY REPAIR - CONTINUED
0330 00
DISASSEMBLY - CONTINUED
39.
Remove two pins (91) from head (2).
89
90
40.
Remove four retaining rings (89), preformed packings
2
(90), three rings (93), and preformed packings (92).
Discard preformed packings and retaining rings.
91
93
92
397-1498
41.
Remove bearing cup (99) from head (2).
95
94
42.
Remove three plugs (98), preformed packings (97),
96
five plugs (95), and preformed packings (96) from
head (2). Discard preformed packings.
2
43.
Remove two dowels (94) from head (2).
99
98
397-1499
97
CAUTION
Protective plate must be used to prevent damage to the highly finished face of barrel when removing bearing.
44.
Use protective plate and puller to remove bearing
62
(101) from shaft (100) of body (62).
100
45.
Remove body (62) from fixture and install on block.
101
397-1500
0330 00-9
