TM 5-3805-261-23-2
LEANING WHEEL CYLINDER REPAIR - CONTINUED
0304 00
DISASSEMBLY - CONTINUED
7
10.
Remove shaft collar (7) from connecting link rod (15).
11.
Remove and discard seal (22) from shaft collar (7).
15
22
397-1891
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP
0020 00.
ASSEMBLY
16
17
1.
Install new seal (22) in shaft collar (7).
18
2.
Use lubricating oil to lubricate inside of shaft collar
(7).
19
20
3.
Install shaft collar (7) on connecting link rod (15).
21
4.
Use clean oil to lubricate new seals (19, 20, and 21),
new preformed packing (17), and new ring (16).
397-1890
5.
Use seal inserter to install new seals (19, 20, and 21)
in cap (18). Lip of seal (20) is toward inside of cap.
Lip of seal (19) is toward outside of cap.
18
6.
Install new preformed packing (17) and new ring (16)
to cap (18).
19
21
20
OUTSIDE
397-2499
0304 00-4