TM 5-3805-261-23-2
LEANING WHEEL MECHANISM MAINTENANCE - CONTINUED
0303 00
INSTALLATION - CONTINUED
31.
Fasten ratchet assembly to arms (4 and 5) and machine
SLING
frame.
32.
Attach sling to bar assembly (15).
33.
Position bar assembly (15) on arm assemblies (4 and
2
5).
5
34.
Install wheel lean lock pin (2) (TM 5-3805-261-10).
35.
Use ratchet assembly to align arm assemblies (4 and
5) with bar (6).
4
15
397-4193
NOTE
Groove in pin must align with opening in top of arm.
36.
Install pin (8).
9
8
7
37.
Install retainer (12), washer (14), and bolt (13). Use
10
shim(s) between pin (8), and retainer (12) to give a
11
0.030 in. (0.76 mm) gap between bar (6) and retainer.
6
38.
Install lock (9), bolt (7), washer (10), and nut (11).
12
Tighten nut to 185 lb-ft (251 Nm).
14
13
4
397-4192
0303 00-8
