TM 5-3805-261-23-2
GOVERNOR CONTROLS MAINTENANCE - CONTINUED
0282 00
INSTALLATION - CONTINUED
43.
Position cable end (53) in lower slot of right and left clamps (70) on rear and front of articulation area.
44.
Install one of two clamps (70), plates (69), two clips (68), washers (67), and nuts (66) loosely. Secure hoses to clips.
NOTE
Do not tighten nuts.
45.
Install one of two clamps (70), plates (69), two clips (68), washers (67), and nuts (66) loosely. Secure hoses to clips.
46.
Position cable end (53) from articulation area up to right side of engine compartment.
53
70
67
53
69
68
66
397-1443
0282 00-19