TM 5-3805-261-23-2
GOVERNOR CONTROLS MAINTENANCE - CONTINUED
0282 00
REMOVAL - CONTINUED
48.
Remove bolt (76).
76
49.
Remove three bolts (78) and washers (77).
50.
Pull lever assembly (54) and housing assembly (55)
away from engine.
51.
Remove housing assembly (55) from lever assembly
(54).
77
78
54
55
397-1427
52.
Remove shaft (79) and keys (84 and 80).
80
79
55
53.
Loosen bolt (85) and remove lever assembly (82).
NOTE
81
Removal of bearings from housing may
84
cause destruction of bearings. Remove
83
bearings only if inspection indicates
replacement is necessary.
54.
Inspect bearings (81 and 83). Replace if cracked, bro-
ken, or worn.
55.
Remove bearings (81 and 83), if necessary, from hous-
ing (55).
82
397-1428
56.
Remove bolt (85) from lever assembly (82).
85
82
397-1429
0282 00-8