TM 5-3805-261-23-2
GOVERNOR CONTROLS MAINTENANCE - CONTINUED
0282 00
REMOVAL - CONTINUED
72.
Remove key (119).
73.
Remove nut (125) and bolt (123).
74.
Remove lever (124) and key (126) from shaft (128).
75.
Remove shaft (128) from bracket (120).
76.
Remove two nuts (121) and bolts (122).
CAUTION
Removal of bushing may cause destruction of bearing. Remove bushing only if inspection indicates replace-
ment is necessary.
77.
Inspect bushing (127). Replace if cracked, broken,
119
120
grooved, or worn.
121
78.
Remove bushing (127), if necessary, and bracket
(120).
122
123
128
124
127
126
125
397-1435
79.
Remove and discard cotter pin (132) from right side of
130
operator's control console (131) in operator's com-
partment.
80.
Remove pin (129).
81.
Separate rod assembly (104) from handle (130).
82.
Remove rod assembly (104) from machine.
129
104
132
131
397-1436
0282 00-11