TM 5-3805-261-23-2
FUEL TRANSFER PUMP MAINTENANCE
(MODELS 130G, 130GSCE, AND 130GNSCE) - CONTINUED
0281 00
DISASSEMBLY
NOTE
If preformed packing is not found in housing, check injection pump for it.
1.
Remove and discard preformed packing (21) from housing (20).
WARNING
Cover is under tension from spring. Wear face shield and remove bolts carefully. Failure to follow this warn-
ing may cause injury to personnel.
2.
Remove two bolts (15) from housing (20).
21
3.
Remove cover (26), preformed packings (24 and 25),
20
valve (23), and spring (22). Discard preformed pack-
ings.
28
4.
Remove washer (27).
27
5.
Remove piston assembly (28).
22
23
24
15
25
26
397-1408
6.
Remove valve (31) from inside piston (29).
7.
Remove preformed packing (30) from valve (31). Dis-
card preformed packing.
29
30
31
397-1409
0281 00-4