TM 5-3805-261-23-2
FUEL TRANSFER PUMP MAINTENANCE
(MODELS 130G, 130GSCE, AND 130GNSCE) - CONTINUED
0281 00
ASSEMBLY
1.
Install valve (39) in housing (20) with pyramid side of
20
valve facing out.
2.
Install new preformed packing (40) and cover (41).
Lubricate outer diameter of new preformed packing
39
with clean diesel fuel.
40
3.
Install two screws (42).
41
42
397-1412
4.
Position tappet (36) in guide (37).
5.
Install ring (38).
6.
Install new preformed packing (35) on groove of
guide (37). Lubricate outer diameter of new preformed
packing with clean diesel fuel.
35
36
37
38
397-1411
7.
Install guide and tappet assembly (32) in housing (20).
20
8.
Install new preformed packing (34) on groove of
sleeve (33). Lubricate outer diameter of new pre-
formed packing with clean diesel fuel.
9.
Install new preformed packing (34) and sleeve (33) as
an assembly in housing (20).
32
33
34
397-1410
0281 00-6