TM 5-3805-261-23-2
FUEL INJECTION PUMP MOUNTING REPLACEMENT - CONTINUED
0280 00
REMOVAL
1.
Remove bolt (9) and washer (8) from support (6).
2
3
1
2.
Disconnect wire assembly (7).
3.
Remove bolts (15, 14, 11, and 10), support (6), and
preformed packings (5, 4, 3, and 2). Discard pre-
4
15
formed packings.
5
4.
Remove plugs (1, 13, and 12) from support (6).
14
6
13
12
11
10
7
9
8
397-1363
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Install plugs (1, 13, and 12) on support (6).
2.
Install new preformed packings (5, 4, 3, and 2), support (6) and bolts (15, 14, 11, and 10) on engine.
3.
Connect wire assembly (7).
4.
Install washer (8) and bolt (9).
5.
Install governor and fuel injection pump (WP 0279 00).
END OF WORK PACKAGE
0280 00-2