TM 5-3805-261-23-2
FUEL INJECTION PUMP REPLACEMENT - CONTINUED
0279 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Fuel injection pump and governor weighs 58 lb (26 kg).
9.
Attach sling to fuel injection pump and governor (10).
10.
Remove bolts (14 and 15) from under support (13).
11.
Remove fuel injection pump and governor (10). Pull
back to separate from front cover plate and lift up
from support (13).
SLING
12.
Remove and discard preformed packings (11, 12, 16,
and 17).
10
11
17
16
12
13
15
14
397-1345
13.
Remove sling.
0279 00-3