TM 5-3805-261-23-1
SCARIFIER ACTUATING ASSEMBLY MAINTENANCE - CONTINUED
0266 00
INSTALLATION - CONTINUED
18.
If cap is too tight, remove two bolts (16), washers (17), and cap (15).
NOTE
Addition of one more spacer to spacers removed results in proper amount of free play between ball (34) and
cap.
19.
Add one spacer (14) and repeat steps 14 through 18
until two bolts (16) can be tightened to remove free
12
play without allowing cap (15) to touch socket (36) of
CORRECT CLEARANCE
rod (12).
(TYPICAL)
20.
Install cap (15), two washers (17), and bolts (16) if
36
removed to add additional spacer(s) (14).
14
15
17
16
34 (HIDDEN)
397-882B
7
21.
Install pin (7) and pin (9).
22.
Install screw (11) and nut (10).
8
9
10
11
397-869
0266 00-16
