TM 5-3805-261-23-1
SCARIFIER ACTUATING ASSEMBLY MAINTENANCE - CONTINUED
0266 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
The hydraulic cylinder weighs 51 lb (23 kg).
23.
Align hydraulic cylinder (1) with yoke (35) and install
pin (5).
35
24.
Install spacer (2), two washers (3), and bolts (4).
25.
Repeat steps 4 through 22 for left scarifier actuating
assembly.
1
26.
Start engine (TM 5-3805-261-10).
2
27.
Operate scarifier lift cylinder.
3 4
28.
Stop engine.
29.
Check for leaks.
30.
Refill hydraulic tank to proper level (WP 0216 00).
5
397-2194
END OF WORK PACKAGE
0266 00-17
