TM 5-3805-261-23-1
SCARIFIER ACTUATING ASSEMBLY MAINTENANCE - CONTINUED
0266 00
INSTALLATION - CONTINUED
13.
Install lubrication fitting (13) on socket (36) of rod
(12).
14.
First mechanic install rod (12) in sleeve (8) and posi-
tion socket (36) of rod (12) on ball (35) of drawbar
(37).
15.
Second mechanic install spacer(s) (14), cap (15), two
washers (17), and bolts (16).
16.
Tighten bolts (16) hand-tight only. Tighten two bolts
evenly until there is no free play (clearance) between
12
the ball (35) and cap (15); do not overtighten.
13
14
15
17
397-870A
16
17.
Examine cap (15) and socket (36) of rod (12) from the
12
side. If cap is touching socket, cap is too tight.
INCORRECT CLEARANCE
TOO TIGHT
(CAP TOUCHING SLEEVE)
36
15
397-881B
0266 00-15
