TM 5-3805-261-23-1
SCARIFIER ACTUATING ASSEMBLY MAINTENANCE - CONTINUED
0266 00
INSTALLATION
NOTE
Steps 1 through 24 cover installation of the right scarifier actuating assembly. Follow these instructions for
the left scarifier actuating assembly.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
The plate weighs 82 lb (37 kg).
1.
With assistance, position plate (28) over two brackets (33).
2.
Install four blocks (29), cap screws (30), washers (31),
30
and new self-locking nuts (32) to secure plate (28) to
29
frame. Tighten cap screws (30) to 900 lb-ft (1,220
28
Nm).
26
33
31
32
397-876
0266 00-11