TM 5-3805-261-23-1
SCARIFIER ACTUATING ASSEMBLY MAINTENANCE - CONTINUED
0266 00
REMOVAL - CONTINUED
16.
Remove four self-locking nuts (32), washers (31), cap screws (30), and blocks (29) from plate (28). Discard self-locking
nuts.
17.
Lower slings just enough to allow removal of plate (28).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
The plate weighs 82 lb (37 kg).
18.
With assistance, remove plate (28).
30
19.
Remove shaft assembly (26).
29
28
26
31
32
397-876
0266 00-7
