TM 5-3805-261-23-1
HYDRAULIC PUMP AND CONTROL VALVE LINES AND FITTINGS REPLACEMENT - CONTINUED
0249 00
REMOVAL
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
Tag hose assemblies before disconnecting to aid in installation.
1.
Disconnect hose assembly (12) from elbow (14). Remove and discard preformed packing (13).
2.
Remove elbow (14) and preformed packing (15) from hydraulic control valve (16). Discard preformed packing.
3.
Disconnect hose assembly (9) from connector (11). Remove and discard preformed packing (10).
4.
Remove connector (11) and preformed packing (1). Discard preformed packing.
5.
Remove bolt (7), washer (8), and two clips (6).
6.
Disconnect hose assembly (5) from connector (3). Remove and discard preformed packing (4).
7.
Remove connector (3) and preformed packing (2). Discard preformed packing.
2
1
3
4
5
6
16
87
9
10
15
397-1630
14
13 12
11
0249 00-2
