TM 5-3805-261-23-1
ARTICULATION CYLINDER REPLACEMENT - CONTINUED
0246 00
REMOVAL
CAUTION
NOTE
This procedure covers the left articulation cylinder. Follow these instructions for the right articulation
cylinder.
Tag hose assemblies before disconnecting to aid in installation.
1.
Disconnect hose assembly (6) from connector (5) of articulation cylinder (3) assembly. Remove and discard preformed
packing (14).
2.
Remove connector (5) and preformed packing (4). Discard preformed packing.
3.
Disconnect hose assembly (9) from connector (8). Remove and discard preformed packing (13).
4.
Remove connector (8) and preformed packing (7). Discard preformed packing.
NOTE
Note number and location of washers when removing pin.
5.
Remove screw (12), lockwasher (11), washer (10), and washer(s) (2) from left side of front frame. Discard lockwasher.
6.
With assistance, attach sling to articulation cylinder (3). Remove slack from sling.
7.
Use brass drift and hammer to remove pin (1) and washer(s) (2).
1
3
2
14
13
5
4
6
2
7
9
8
10
11
12
397-1607
0246 00-2