TM 5-3805-261-23-1
ARTICULATION CYLINDER REPLACEMENT - CONTINUED
0246 00
NSTALLATION - CONTINUED
NOTE
Use washers as required to ensure that cylinder is level.
1
6.
Install three washers (2) as required.
3
7.
Align three washers (2), front frame mountings, and
2
cylinder (3) eye.
8.
Install pin (1).
9.
Install washer (10), new lockwasher (11), and screw
14
(12).
10.
Install new preformed packing (7) and connector (8).
13
11.
Install new preformed packing (13) and hose assembly
(9) to connector (8).
12.
Install new preformed packing (4) and connector (5).
13.
Install new preformed packing (14) and connect hose
assembly (6).
4
7
6 5
8
9
2
10
11
12
397-1610
14.
Remove pivot locking pin (TM 5-3805-261-10).
15.
Install left or right side engine panel (WP 0182 00).
16.
Start engine (TM 5-3805-261-10).
17.
Articulate machine slowly left and right to bleed air from hydraulic system (TM 5-3805-261-10).
18.
Stop engine and check for leaks.
19.
Check hydraulic oil level and fill as necessary (WP 0216 00).
END OF WORK PACKAGE
0246 00-5
