TM 5-3805-261-23-1
BLADE FLOAT PILOT VALVE MAINTENANCE (CCE MACHINE)
THIS WORK PACKAGE COVERS
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Equipment Conditions
Maintenance Level
Machine parked on level ground (TM 5-3805-261-
Unit
10)
Tools and Special Tools
Parking/emergency brake applied (TM 5-3805-261-
Tool kit, general mechanic's (Item 89, WP 0348 00)
10)
Implements lowered to ground (TM 5-3805-261-
Materials/Parts
10)
Cap set, protective (Item 7, WP 0349 00)
Engine off (TM 5-3805-261-10)
Rag, wiping (Item 35, WP 0349 00)
Battery disconnect switch in OFF position (TM 5-
Packing, preformed (7)
3805-261-10)
Seal (6)
Blade float pilot valve wiring harness removed (WP
References
Hydraulic pressure relieved (WP 0020 00)
REMOVAL
CAUTION
Cap hose and tube ends to prevent contamination.
NOTE
Tag hose and tube assemblies before disconnecting to aid in installation.
1.
Disconnect hose assembly (15) from elbow (13).
Remove and discard preformed packing (14).
6
1
4
5
2.
Disconnect hose assembly (1) from tee (3). Remove
2
and discard preformed packing (2).
3
3.
Disconnect hose assembly (6) from connector (4).
Remove and discard preformed packing (5).
7
4.
Disconnect hose assembly (7) from connector (9).
Remove and discard preformed packing (8).
8
5.
Remove bolt (10) and washer (11).
9
6.
Remove blade float pilot valve (12).
15
14
13
12 11
10
397-669
