TM 5-3805-261-23-1
HYDRAULIC PUMP DRIVE MAINTENANCE - CONTINUED
0232 00
ASSEMBLY - CONTINUED
7.
Install propeller shaft (6) assembly on U-joint assem-
bly (11) with four washers (9) and bolts (10). Tighten
bolts to 35 to 45 lb-ft (47 to 61 Nm).
6
8.
Install propeller shaft assembly (6) to U-joint assem-
11
14 13
bly (12) with four washers (13) and bolts (14). Tighten
bolts to 35 to 45 lb-ft (47 to 61 Nm).
9
12
10
397-1467
INSTALLATION
2
1.
Apply antiseize compound to pump shaft.
3
2.
Install U-joint yoke (1), washer (2), and nut (3).
Tighten nut to 125 to 145 lb-ft (169 to 197 Nm).
4
5
NOTE
Bolts (8) have coarse threads. Bolts (5)
6
1
have fine threads.
3.
Install propeller shaft (6) assembly, four washers (7),
and bolts (8). Tighten bolts to 35 to 45 lb-ft (47 to 61
8
Nm).
7
4.
Install U-joint of propeller shaft (6) on U-joint yoke
397-1466
(1) with four washers (4) and bolts (5). Tighten bolts
to 35 to 45 lb-ft (47 to 61 Nm).
5.
Apply grease to three lube fittings (WP 0023 00).
6.
Install hydraulic drive protection cover (WP 0219 00).
END OF WORK PACKAGE
0232 00-5
