TM 5-3805-261-23-1
HYDRAULIC PUMP JUNCTION BLOCK AND LINES REPLACEMENT - CONTINUED
0220 00
INSTALLATION - CONTINUED
6.
Install junction block (9) in position, aligning with mounting holes and secure with spacer (35), washer (34), and bolt
(33).
7.
Install two washers (31) and bolt (32).
8.
Connect hose assembly (24) to hydraulic control valve.
9.
Connect hose assembly (22) to hydraulic tank.
10.
Connect hose assemblies (24 and 22) on machine.
11.
Install two new preformed packings (23) and connect hose assemblies (24 and 22) to junction box (9).
23
22
9
23
24
397-4364
9
13
12
12.
Install two new preformed packings (14 and 12) and
14
16
15
connector (13) on junction box (9).
13.
Connect tube assembly (15) to connector (13).
14.
Install clamp (16), hose (17), and clamp (18).
17
15.
Tighten clamps (16 and 18).
16.
Install two new preformed packings (20) and connec-
tor (21) to hydraulic pump assembly.
18
17.
Connect tube assembly (19) to connector (21).
HYDRAULIC
PUMP
19
20
21 20
ASSEMBLY
397-4363
0220 00-7
