TM 5-3805-261-23-1
HYDRAULIC PUMP JUNCTION BLOCK AND LINES REPLACEMENT - CONTINUED
0220 00
REMOVAL - CONTINUED
27.
Remove plugs (44, 46, and 49) and preformed pack-
46
ings (45, 47, and 48) from junction block (9). Discard
preformed packings.
47
45
44
9
48
49
397-719
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
25
26
27
Lightly lubricate all preformed packings
28
with clean oil before installation.
1.
Install new preformed packings (48, 47, and 45) and
plugs (49, 46, and 44) on junction block (9).
43
29
2.
Position three grommets (30 and 29) and bracket (28)
42
on junction block (9).
41
3.
Install stud (36), washers (39 and 37), and nut (41).
40
37
38
36
4.
Install washers (27 and 26) and bolt (25).
39
5.
Install washers (38 and 40), clamp (42), and bolt (43).
30
31
35
9
34
33
32
397-718
0220 00-6
