TM 5-3805-261-23-1
HYDRAULIC PUMP JUNCTION BLOCK AND LINES REPLACEMENT - CONTINUED
0220 00
REMOVAL - CONTINUED
17.
Disconnect hose assemblies (22 and 24) and remove two preformed packings (23) from junction block (17). Discard
preformed packings.
18.
Disconnect other end of hose assembly (22) from hydraulic tank and remove from machine.
19.
Disconnect other end of hose assembly (24) from hydraulic control valve and remove from machine.
22
23
9
24
397-717
20.
Remove two bolts (32) and washers (31) from bracket (28).
25
21.
Remove bolt (33), washer (34), and spacer (35) from
26
bracket (28)
27
28
22.
Remove bolt (43), clamp (42), washers (40 and 38)
from junction block (9).
43
23.
Remove bolt (25) and washers (26 and 27).
29
24.
Remove nut (41), washers (39 and 37), and stud (36).
42
25.
Remove junction block (9).
41
40
26.
Remove bracket (28) and three grommets (29 and 30).
37
38
36
39
30
31
35
9
34
33
32
397-718
0220 00-5