TM 5-3805-261-23-1
CIRCLE DRIVE MOTOR ASSEMBLY REPLACEMENT - CONTINUED
0217 00
REMOVAL
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause injury to per-
sonnel.
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
Tag hose assemblies before disconnecting to aid in installation.
1.
Disconnect two hose assemblies (6) from connectors (4) on circle drive motor (3).
NOTE
Later configuration machines have four seals instead of two O-rings.
2.
Remove and discard two O-rings (5) or four seals (5).
3.
Remove two connectors (4).
4.
Remove four bolts (2), washers (1), and circle drive motor (3).
1
2
3
6
397-668
6
4,5 (HIDDEN)
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
0217 00-2
