TM 5-3805-261-23-1
CHANGING HYDRAULIC OIL - CONTINUED
0216 00
DRAINING
1.
Remove hydraulic tank fill cap (1).
2.
Remove filter screen (2) from fill tube (3).
3.
Position drain pan under drain hose (4).
4.
Loosen drain plug (5) on hydraulic tank (6) and allow oil to drain.
2 (HIDDEN)
1
3
6
5
4
397-1090A
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
REFILLING
1.
Tighten drain plug (5) on hydraulic tank (6).
2.
Install filter screen (2) in fill tube (3).
3.
Add oil to hydraulic tank through fill tube (3). See WP 0020 00 for hydraulic tank capacity.
4.
Check oil level with sight gauge (7). Oil should be at FULL mark.
5.
Install hydraulic tank fill cap (1).
6.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
7.
Operate each hydraulic control through its full motion at least three times (TM 5-3805-261-10).
8.
Shut down engine and check hydraulic oil level. Oil level should be at FULL mark.
9.
If necessary, remove hydraulic tank fill cap (1) and add oil until level is at FULL mark.
10.
Check for oil leaks.
END OF WORK PACKAGE
0216 00-2