TM 5-3805-261-23-1
FRONT WIPER (LOWER) MAINTENANCE (CCE MACHINE) - CONTINUED
0206 00
INSTALLATION - CONTINUED
NOTE
Turn wiper switch on. Turn battery disconnect switch ON and OFF as needed to stop motor so that flat sur-
faces at sides of threaded motor shaft align with mounting holes in arm.
12.
Install new lockwasher (7) and nut (8).
NOTE
Turn wiper switch on. Turn battery disconnect switch ON and OFF as needed so that bolts are exposed.
13.
Install three new lockwashers (9) and bolts (10).
14.
Install new gasket (6), cover (5), and four screws (16) in lower wiper area of exterior of cab.
15.
Install two new gaskets (11), washers (12), nuts (13), caps (14), and drivers (15) on linkage (1) shafts.
16.
Install two clips (20), blades (21), screws (19), and new locknuts (18) on arm assembly (17).
21
20
18
19
7
17
10
1
8
9
12
11
13
15 14
6
5
16
397-636
0206 00-6
