TM 5-3805-261-23-1
STEERING CONSOLE SUPPORT REPLACEMENT (MODELS 130G, 130GSCE, AND 130GNSCE)
0198 00
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Maintenance Level
Unit
Equipment Conditions
Tools and Special Tools
Machine parked on level ground (TM 5-3805-261-
10)
Shop equipment, field maintenance (Item 74, WP
Parking/emergency brake applied (TM 5-3805-261-
10)
Materials/Parts
Implements lowered to ground (TM 5-3805-261-
10)
Engine off (TM 5-3805-261-10)
Bolt, self-locking (4)
Battery disconnect switch in OFF position (TM 5-
Locknuts (6)
3805-261-10)
Pin, cotter
Steering console hood and panel cover removed
Screw, tapping (14)
REMOVAL
1.
Remove seven tapping screws (3) from steering console support (1). Discard tapping screws.
2.
Remove two plates (2).
3.
Remove three pins (4).
4.
Repeat for other side of steering console support (1).
1
2
3
4
397-2397