TM 5-3805-261-23-1
STEERING CONSOLE SUPPORT REPLACEMENT (MODELS 130GS AND 130GNS) - CONTINUED
0197 00
INSTALLATION
1.
Install pad (48), four grommets (49), console base (47), four washers (47), and new self-locking bolts (45) in steering
console support.
2.
Install channels (41 and 36), two shafts (43), four bearings (38), washers (39), and screws (40).
3.
Install two plugs (39).
4.
Install bracket (37), two washers (44), and bolts (42).
5.
Install angle (33), two washers (35), and bolts (34).
6.
Install shaft (30), two brackets (23), spacers (24),
21
washers (28), and bolts (29).
20
22
7.
Install two brackets (22), angles (21), bolts (31), wash-
23
ers (25) and new locknuts (26).
31
8.
Install two nuts (27) and screws (20).
24
30
26
25
27
28
29
397-622
0197 00-5