TM 5-3805-261-23-1
STEERING CONSOLE SUPPORT REPLACEMENT
(MODELS 130G, 130GSCE, AND 130GNSCE) - CONTINUED
0198 00
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Install pad (56), four grommets (59), console base (60), four washers (61), and new self-locking bolts (62).
2.
Install two double angle brackets (49).
3.
Install four bolts (53), shouldered washers (63), spacers (52), bearings (51), retainers (58), washers (65), new locknuts
(58), and protective caps (62).
4.
Install cylinder (46) and bearing assembly (45).
5.
Install straight pin (48) and new cotter pin (47).
6.
Install cam (24) and bearing (23).
7.
Install ball bearing (26), two washers (28), and nut (29).
8.
Install two eyebolts (31), and bearings (30), as an assembly.
9.
Install four bolts (42), washers (43), and nuts (44).
10.
Install shaft (41), and two woodruff keys (40), and bearing (25). Tighten setscrew (32) on cam (24).
11.
Install connector (22).
12.
Install bearing (38) and eyebolt (39) as an assembly.
13.
Install two screws (37), washers (35), springs (36), new locknuts (34), and four plates (33).
1
22
24
26
23
28
25
27
29
40
24
32
30
41
31
40
32
33
34
40
41
39
39
35
42,43,44
38
36
37
397-2400
0198 00-5
