TM 5-3805-261-23-1
AIR DRYER MAINTENANCE (TYPES I AND II MACHINES) - CONTINUED
0164 00
ASSEMBLY - CONTINUED
8.
Install new seal (22) on shaft (23).
22
9.
Install new O-ring (24) on housing (21).
23
24
21
397-2348
10.
Install cap (20) on housing (21), aligning cap and
housing with alignment marks. Install washer (19) and
two nuts (18).
18,19
397-2347
21
20
INSTALLATION
1.
Install new preformed packings (2, 6, and 12) and
1,2
three elbows (1, 5, and 11) on air dryer (15).
16,17
2.
Install two clamps (13 and 16), four nuts (14 and 17),
3,4
and air dryer (15).
15
3.
Install new O-rings (4, 8, and 10) and connect three
hoses (3, 7, and 9).
5,6
7,8
13,14
11,12
9,10
397-2503
END OF WORK PACKAGE
0164 00-6
