TM 5-3805-261-23-1
PARKING BRAKE ACTUATOR AND RELEASE VALVE REPLACEMENT - CONTINUED
0157 00
REMOVAL - CONTINUED
CAUTION
Cap all hose and tube ends to prevent contamination.
NOTE
Tag all parts before removal to aid in installation.
1.
Disconnect hose assembly (5) from elbow (4).
2.
Connect shop air line to elbow (4) and apply pressure to relieve release valve pressure.
3.
Remove cotter pin (3) from pin (16). Discard cotter pin.
4.
Remove pin (16) from rod end (15).
5.
Remove shop air line from elbow (4).
6.
Remove two nuts (9), lockwashers (10), and bolts (14) from bracket (11). Discard lockwashers.
7.
Remove elbow (4) and plug (8) from release valve assembly (7).
8.
Remove release valve assembly (7).
9.
Remove nipple (2) and elbow (6).
10.
Remove two nuts (12), lockwashers (13), and bracket (11). Discard lockwashers.
11.
Remove air brake chamber assembly (1).
1
2
3
4
15
14
13
16
7
6
12
8
11
5
10
9
397-2296
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
0157 00-2
