TM 5-3805-261-23-1
LEANING WHEEL CYLINDER REPLACEMENT - CONTINUED
0156 00
INSTALLATION - CONTINUED
NOTE
Install new O-rings between hose assemblies (5 and 1) and elbows (6 and 4) if discarded in removal.
7.
Install new preformed packing (7) and elbow (6).
8.
Install hose assembly (5).
5
6
7
397-4202
9.
Install new preformed packing (3) and elbow (4).
4
10.
Connect hose assembly (1).
3
2
1
2
11.
Install two fittings (2). Add new grease (WP 0023 00).
397-2339
12.
Remove wheel lean lock pin (TM 5-3805-261-10).
13.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
14.
Check for leaks.
15.
Stop engine.
END OF WORK PACKAGE
0156 00-5
