TM 5-3805-261-23-1
DISCONNECT SWITCH CABLE REPLACEMENT - CONTINUED
0142 00
REMOVAL
NOTE
Tag cable before disconnecting to aid in installation.
For the CCE and Type II machines, the disconnect switch is located on the operator's console. For the
Type I machine, the disconnect switch is located on the hood assembly. Instructions apply to both con-
figurations with differences as indicated.
1.
Remove nut (1) and lockwasher (2) and disconnect cable (3) from starting motor (8). Discard lockwasher.
2.
For Type I machine, disregard steps 3 through 10 and go to step 11.
3.
Remove and discard two tie straps (4).
4.
Remove two bolts (7), washers (6), and clips (5) from inner-right-rear frame.
1
8
2
3
7
5
4
6
4
397-2145
5.
Remove two nuts (11) and washers (10) from bracket
(14).
6.
Remove clip (9) from hose.
7.
Remove plate (12).
8.
Separate two clamps (13) enough to pull cable (3)
9
through.
10
11
14
13
12
397-423
0142 00-2
