TM 5-3805-261-23-1
TURN SIGNAL SWITCH REPLACEMENT - CONTINUED
0073 00
REMOVAL
NOTE
Tag wire assemblies before disconnecting to aid in installation.
1.
Disconnect three wire assemblies (4) at rear of steering console housing (5).
2.
Remove three nuts (3), lockwashers (2), bolts (6), and switch (1) from steering console housing (5). Discard lockwash-
ers.
3
2
4
1
5
6
397-242
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install switch (1), three bolts (6), new lockwashers (2), and nuts (3) in steering control console (5).
2.
Connect three wire assemblies (4) at rear of steering console housing (5).
3.
Install steering console hood (WP 0196 00).
4.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0073 00-2
