TM 5-3805-261-23-1
ELECTRONIC MONITORING SYSTEM (EMS) FAULT LIGHT REPLACEMENT - CONTINUED
0072 00
REMOVAL
NOTE
Tag wire assemblies before disconnecting to aid in installation.
1.
Disconnect two wire assemblies (4) from terminals (10) at rear of steering console housing (7).
2.
Remove nut (5), washer (6), and socket (3) from steering console housing (7).
3.
Remove lens (1) and lamp (2) from socket (3).
4.
Remove two screws (8), lockwashers (9), and terminals (10) from socket (3). Discard lockwashers.
4
5
6
3
2
1
7
10
9
8
397-241
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install two terminals (10), new lockwashers (9), and screws (8) on socket (3).
2.
Install lamp (2) and lens (1) on socket (3).
3.
Install socket (3), washer (6), and nut (5) on steering console housing (7).
4.
Connect two wire assemblies (4) to terminals (10) at rear of steering console housing (7).
5.
6.
END OF WORK PACKAGE
0072 00-2