TM 5-3805-261-23-1
ELECTRONIC MONITORING SYSTEM (EMS) PANEL REPLACEMENT - CONTINUED
0069 00
REMOVAL
1.
Disconnect wiring harness (3).
2.
Remove nut (9) and disconnect wire assembly (10).
3.
Remove two nuts (11), washers (12), bracket (14), and two nuts (13).
4.
Remove two nuts (8), washers (7), and bracket (6).
5.
Remove two nuts (5) and bracket (4).
NOTE
Remove EMS panel and plate only if inspection indicates replacement is necessary.
6.
Remove EMS panel (2) if necessary.
7.
Remove plate (1) if necessary.
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install plate (1) to EMS panel (2) if removed.
2.
Position EMS panel (2) in steering control console if removed.
3.
Install bracket (4) and two nuts (5).
4.
Install bracket (6), two washers (7), and nuts (8).
5.
Install two nuts (13), bracket (14), two washers (12), and nuts (11).
6.
Connect wire assembly (10) and install nut (9).
7.
Connect wiring harness (3) and tighten.
8.
9.
0069 00-2