TM 5-3805-261-23-1
STARTING MOTOR REPLACEMENT - CONTINUED
0067 00
INSTALLATION - CONTINUED
5.
Position wire assembly (2) on terminal stud (1).
6.
Install new lockwasher (3) and nut (4). Tighten nut to 36 lb-ft (49 Nm).
7.
Position cable assembly (5) on terminal stud (12).
8.
Install new lockwasher (6).
9.
Position wire assembly (11), cable assembly (10), and wire assembly (7).
10.
Install new lockwasher (8) and nut (9). Tighten nut to 22 lb-ft (30 Nm).
1
2
3
4
5
6 7
8
397-
9
12
10
11
397-222
11.
Install right side engine panel (WP 0182 00).
12.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0067 00-5
