TM 5-3805-261-23-1
FAN AND FAN DRIVE REPLACEMENT - CONTINUED
0063 00
INSTALLATION - CONTINUED
4.
Apply a light coat of clean grease to lip of new seal
(28) in hub (25).
5.
Install bearing (27) through opposite end of hub (25)
until contact with new seal (28) is made
6.
Install spacer (32) in hub (25).
7.
Fill cavity between bearings of hub (25) with clean
grease.
29
8.
Install bearing (31).
27 28
9.
Position hub (25) with assembled parts (29, 28, and
27) on shaft (30).
32
31
30
24
9
25
397-193
26
10.
Install pulley (9).
11.
Install new preformed packing (21).
12.
Install spacer (19) and two new self-locking bolts (20).
13.
Install adapter (5).
14.
Install fan (7) and six washers (22) and bolts (23).
9
19
20
21
5
397-194
7
22
23
.
0063 00-5
