TM 5-3805-261-23-1
FAN AND FAN DRIVE REPLACEMENT - CONTINUED
0063 00
REMOVAL - CONTINUED
NOTE
Remove bolts and washers only if inspection indicates replacement is necessary.
8.
Loosen four bolts (16).
1
17 18
9.
Remove two nuts (18), washers (17), bolts (10), wash-
ers (11), mountings (12), and plate (13) from fuel tank
14 15
(1).
13
10.
Lean bracket (2) forward.
12
11
11.
Remove six bolts (15) and washers (14) between
10
bracket (2) and fuel tank (1).
2
12.
Remove six bolts (23) and washers (22).
13.
Separate fan (7) and adapter (5).
9
14.
Remove two self-locking bolts (20) and spacer (19).
Discard self-locking bolts.
16 16
15.
Remove and discard preformed packing (21).
19
20
21
5
7
397-190
23 22
16.
Stand pulley (9) on end of bracket (24) with hub (25)
pointing upward.
NOTE
Drive down on hub to expose bearing.
17.
Separate hub (25) from bearing (26).
18.
Remove bearing (26) and hub (25).
9
26
24
25
397-191
397-189
.
0063 00-3