TM 5-3805-261-23-1
FAN AND FAN DRIVE REPLACEMENT - CONTINUED
0063 00
REMOVAL - CONTINUED
19.
Remove pulley (9) from shaft (30).
20.
Remove spacers (29).
21.
Remove seal (28) and bearing (27). Discard seal.
22.
Remove and discard pin (31).
23.
Remove shaft (30) from bracket (24).
30
28 29
27
9
31
24
397-192
32
.
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
Align pin hole in shaft with hole in bracket.
1.
Install shaft (30) in bracket (24).
2.
Install new pin (31).
NOTE
Drive new seal in so that it is flush with small end of hub. Lip of new seal must face outward.
3.
Install new seal (28).
0063 00-4
