TM 5-3805-261-23-1
RADIATOR DRAIN LINE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Equipment Conditions
Machine parked on level ground (TM 5-3805-261-
Unit
10)
Parking/emergency brake applied (TM 5-3805-261-
Tools and Special Tools
10)
Tool kit, general mechanic's (Item 89, WP 0348 00)
Implements lowered to ground (TM 5-3805-261-
10)
Materials/Parts
Engine off (TM 5-3805-261-10)
Cap set, protective (Item 7, WP 0349 00)
Battery disconnect switch in OFF position (TM 5-
3805-261-10)
Rag, wiping (Item 35, WP 0349 00)
Cooling system drained (WP 0065 00)
References
Rear bumper removed (WP 0204 00 or WP 0205
WARNING
DO NOT service cooling system unless engine has been allowed to cool down. This is a pressurized
cooling system and escaping steam or hot coolant may cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool down. Loosen
cap to first stop and let any pressure out of cooling system, then remove cap. Failure to follow this
warning may cause serious burns.
Wear effective eye, glove, and skin protection when handling coolants. Failure to do so may cause
injury to personnel.
