TM 5-3805-261-23-1
RADIATOR HOSES, LINES, AND FITTINGS REPLACEMENT - CONTINUED
0057 00
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Install new gasket (19) and housing (18).
2.
Position two clamps (27).
3.
Install hose (17) on housing (18) and water pump.
4.
Tighten two clamps (27).
19
NOTE
18
Do not tighten bolt.
17
5.
Install bolt (20).
20
NOTE
26
25
Do not tighten bolt.
27
6.
Install two bolts (26) in upper mounting holes of hous-
ing (18).
24
7.
Position oil gauge tube (25).
23
8.
Install two bolts (26) in lower mounting holes of hous-
21
ing (18).
22
397-177
9.
Tighten bolt (20) and two bolts (26) in upper mounting
holes of housing (18).
10.
Install hoses (16 and 9) on tube (14).
11.
Position spacer (22) and clamp (24) on engine adapter
housing (21) and install bolt (23).
12.
Position tube (14) with hoses (16 and 9) under fuel
tank, connecting water pump to radiator.
13.
Position two clamps (15).
14.
Connect hose (16) to water pump.
15.
Tighten two clamps (15).
16.
Position two clamps (10).
17.
Connect hose (9).
10
18.
Tighten two clamps (10).
19.
Install clamp (13), washer (12), and bolt (11).
14
16
13
12
11
9
15
397-176
0057 00-4
