TM 5-3805-261-23-1
TEMPERATURE REGULATOR (THERMOSTAT) REPLACEMENT - CONTINUED
0059 00
INSTALLATION
NOTE
Pyramid part of thermostat faces up.
1.
Install thermostat (5).
2.
Install plug (4) in housing (7).
3.
Install new gasket (6), housing (7), four washers (3), and bolts (8) to cylinder head.
4.
Connect hose (10) by sliding down from tube (11) onto housing (7).
5.
Tighten two clamps (9).
6.
Install washer (1) and bolt (2) to front-upper-left of fuel tank.
7.
Refill cooling system (WP 0065 00).
8.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
9.
Check for leaks. Stop engine.
10.
Install left side engine panel (WP 0182 00).
11.
Install engine hood (WP 0181 00).
END OF WORK PACKAGE
0059 00-3
