TM 5-3805-261-23-1
CAP GUARD REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Maintenance Level
Unit
Equipment Conditions
Tools and Special Tools
Machine parked on level ground (TM 5-3805-261-
10)
Parking/emergency brake applied (TM 5-3805-261-
Shop equipment, common no. 1 (Item 75, WP 0348
10)
Implements lowered to ground (TM 5-3805-261-
10)
Materials/Parts
Engine off (TM 5-3805-261-10)
Battery disconnect switch in OFF position (TM 5-
3805-261-10)
Rivets (6)
REMOVAL
1.
Remove and discard rivet (6) by drilling out from top of radiator support (8) and remove cap (4).
2.
Inspect pad (3) on inside of cap (4). Remove pad and discard if torn or deteriorated.
3.
Remove and discard two rivets (2) by drilling out and remove bracket (1).
4.
Remove and discard three rivets (5) by drilling out and remove bracket (7).
4
3
2
5
6
1
7
8
397-174