TM 5-3805-261-23-1
SHIELDS, BAFFLES, AND PLATE REPLACEMENT - CONTINUED
0053 00
INSTALLATION
1.
Position baffle (46) and shield (47) on front-lower-right side of radiator and support.
NOTE
Do not tighten bolts.
2.
Install two washers (52) and bolts (51).
3.
Install clamp (55), washer (54), and bolt (53), securing harness assembly.
4.
Install clamp (48), washer (49), and bolt (50), securing hydraulic oil cooler hose.
5.
Tighten two bolts (51).
6.
Position baffle (36) on front-upper-right of radiator and support.
7.
Install washer (35) and bolt (34) on front-upper-right of radiator and support.
8.
Position shield (45).
9.
Install three washers (38) and bolts (37).
10.
Install clamp (41), washer (40), and bolt (39), securing hydraulic oil cooler hose.
11.
Install clamp (44), washer (43), and bolt (42), securing harness assembly.
12.
Position shield (31) on front-lower-left of radiator and
support.
13.
Install two washers (30) and bolts (29).
14.
Position molding (28).
15.
Install five washers (27) and bolts (26).
16.
Install three clamps (25), washers (32), and bolts (33)
under molding (28), securing two harness assemblies.
29 30
31
27
26
28
25
32
33
397-170
0053 00-5
