TM 5-3805-261-23-1
FUEL TANK MAINTENANCE - CONTINUED
0044 00
INSTALLATION - CONTINUED
5.
Install valve (28), hose (30), and clamp (29).
22
2
6.
Install plug (26) and bolt (27) on left side of fuel tank
23
(2). Tighten bolt to 180 lb-in. (20 Nm).
24
7.
Position plate (22) on front-upper-inside of radiator
support.
8.
Install bolt (25), washers (23), and nuts (24) on center-
top-rear of fuel tank, securing plate (22) to fuel tank
25
(2).
9.
Install two bolts (25), washers (23), and nuts (24) on
26
center of fuel tank (2).
27
28
29
30
397-140
15
10.
Install hoses (13 and 19) on tube (14) in top of engine
18
compartment.
16
14
11.
Position four clamps (18 and 21) on tube (14).
17
13
12.
Install tube (14) on temperature regulator housing.
13.
Install hose (13) in top of engine, sliding over temper-
ature regulator housing.
19
21
14.
Tighten two clamps (21).
20
15.
Install hose (19) in left-top of radiator (20), sliding
over neck of radiator.
16.
Tighten two clamps (18).
17.
Install clip (17), washer (16), and bolt (15) in left-top
of engine, securing tube (14) to fuel tank (2).
2
397-139
0044 00-7
